Up to $3,500 attic, $5,000 walls, $5,000 floor

Insulation Rebates in Bellevue

Puget Sound Energy takes money off your invoice for insulation, air sealing and duct work. Attic insulation pays up to $3,500, and wall or floor insulation pays up to $5,000 each, if a PSE contractor does the job.

On this page
  1. Quick quiz: insulation in Bellevue
  2. What insulation rebates pay in Bellevue
  3. Bellevue's housing stock
  4. Who can claim
  5. Free help for lower incomes
  6. How to claim a Bellevue insulation rebate
  7. Common questions
  8. What to do next
Quick quiz

Quick quiz: insulation in Bellevue

Questions about Bellevue, from the data behind this page. Tap an answer to see why.

1. Rebates in Bellevue often depend on the utility. Which one do we use for Bellevue?

Puget Sound Energy is the utility we use for Bellevue. Rebates often depend on who supplies your power or gas, so check yours first.

2. We list insulation rebates for Bellevue. What is the biggest 'up to' amount?

Our summary for Bellevue: Up to $3,500 attic, $5,000 walls, $5,000 floor. The amount you get depends on your home, income and utility, so use the calculator.

Estimate my rebates
← Back to Bellevue rebate hub Water Heater Rebates in Bellevue Heat Pump Rebates in Bellevue Washington Battery Rebates Washington Solar Rebates Washington EV Charger Rebates Washington Smart Thermostat Rebates

What insulation rebates pay in Bellevue

We read Puget Sound Energy's weatherization page on October 6, 2026. You must be a PSE electric or natural gas customer, and PSE electricity or gas must be your main source of heat. The rebate is an instant discount, so your contractor deducts it from the invoice.

Open

Attic insulation, thinnest attics

$1.75 per square foot, up to $3,500

For attics at R-11 or less brought up to R-49. Attics at R-12 to R-19 get $0.50 per square foot, up to $1,000. The amount also depends on the type of home.

Single-family homes
Open

Wall insulation

$2.50 per square foot, up to $5,000

For existing walls that need insulation.

Single-family homes
Open

Floor insulation

$2.50 per square foot, up to $5,000

For floors over crawlspaces or open spaces.

Single-family homes
Open

Air sealing

$0.20 per square foot, up to $400

Paid separately for the attic and the floor.

Single-family homes
Open

Ducts

$550 to $1,250 per home

Duct sealing only, up to $550. Duct sealing and insulation, up to $1,000. Advanced duct sealing, up to $1,250.

Single-family homes

Working it out

A Bellevue house with an 1,100 square foot attic at R-11 would earn 1,100 times $1.75, which is $1,925, for the insulation, plus 1,100 times $0.20, or $220, for sealing the attic. That is $2,145 off the invoice. Your contractor measures the real area and checks the existing level.

Bellevue's housing stock

The US Census Bureau's American Community Survey (2020 to 2024) says about 47 percent of Bellevue homes were built before 1980, almost none before 1940 and about 27 percent in 2000 or later. That is a newer mix than in Spokane or Tacoma, so a share of Bellevue homes will already have more insulation than the rebate's starting levels. PSE says the attic amount depends on the type of home and the amount of insulation already there. Start with a measurement before you plan.

Because the amounts are per square foot, the order of work matters. Ask the contractor to list the area of each space, the old R-value and the new R-value on the bid, and to say whether air sealing is included. If two bids show different areas for the same attic, ask why. A short walk through the attic with the contractor is the easiest way to settle it.

About 46 percent of Bellevue homes are detached houses and 52 percent of households own. The rebate is for single-family homes of four units or fewer and manufactured homes.

Who can claim

You must be a current PSE residential electric or natural gas customer and use PSE electricity or gas as the main source of space heating. You must live in a single-family home of four units or less, or a manufactured or mobile home. New construction and buildings with five or more attached units are not eligible. A PSE Recommended Energy Professional or Trade Ally must do the work. PSE says you may not use an out-of-network contractor or do the work yourself.

Free help for lower incomes

PSE says income-qualified customers may be eligible for its no-cost Home Weatherization Assistance Program. The page does not give the income limits or the work covered. PSE's Efficiency Boost form is the quickest way to see where your household stands. Our Washington home electrification guide covers the state programs for lower incomes.

How to claim a Bellevue insulation rebate

  1. Check that PSE supplies your main heat, either electricity or natural gas.
  2. Ask a PSE Recommended Energy Professional or Trade Ally to measure your existing insulation.
  3. Ask for a bid that shows the PSE instant rebate as its own line.
  4. Check the Efficiency Boost form and the Home Weatherization Assistance Program if your income may qualify.
  5. Keep the final invoice.
Want a number for your home? Run our Washington rebate calculator and pick Bellevue to see what your utility pays.

Common questions

How much does PSE pay for attic insulation?

$1.75 per square foot up to $3,500 for attics at R-11 or less, and $0.50 per square foot up to $1,000 for attics at R-12 to R-19, when brought up to R-49.

Is it a check or an instant discount?

PSE says your contractor deducts the instant rebate from your invoice.

Can I do the work myself?

No. PSE says to use a PSE Recommended Energy Professional or Trade Ally.

Does my heat have to be PSE electric?

PSE electricity or PSE natural gas must be your primary space heat.

Is there a federal credit?

No. The IRS says the home improvement credit covers improvements through December 31, 2025.

What to do next

See the Bellevue heat pump page or return to the Bellevue rebate hub.

By Sam Menard. Sources, last read October 6, 2026: PSE weatherization rebates, PSE Efficiency Boost, IRS Energy Efficient Home Improvement Credit. All Bellevue rebates → Every Puget Sound Energy rebate →

Insulation rebates in every region: compare insulation rebates by province and state, with a BC attic calculator.

Statewide answer: see Washington heating bill help: LIHEAP dates and income limits, with what is open, what has closed and the dates to watch.

Not ready to talk to a contractor yet?

Short reads and quick quizzes. Learn the rules first, then call.

From Sam

Get the monthly rebate update

Once a month: new and changing rebate programs across every province and state we cover, plus what's new in heat pumps, solar and batteries. Short, sourced, no marketing.

No spam, ever. Unsubscribe anytime.

See my rebates and installers